Tracmat™ For 36′ x 50′ Stinger Spillpal
Request Quote
For Stinger Spillpal: 36'x50'
Placed inside the Stinger Spillpal, allowing trucks to drive in and out while protecting the berm from punctures and tears.
Description
Additional information
| Dimensions | 36 × 50 cm |
|---|
Related products
-
ChemKlenz™ 2‐KG Pressurized Cylinder
Request QuoteInquireChemKlenz™ 2‐KG Pressurized Cylinder
ChemKlenz is a proprietary formulation of non-toxic, environmentally safe metal oxides for neutralizing a wide range of toxic chemicals. The ChemKlenz formulation is non-flammable, non-corrosive and significantly reduces both liquid and vapor hazards. Since the dry powder neutralizes threats upon contact, on-site incident management and clean up times are reduced.
Request Quote -
Hazmat Pad™
Request QuoteInquire -
Tri-Star Max – 42′ x 13′ x 9″ Spill Containment System for HEMTT Refueler Tanker
Request QuoteInquireTri-Star Max – 42′ x 13′ x 9″ Spill Containment System for HEMTT Refueler Tanker
Tri-Star Max – 42' x 13' x 9″ Spill Containment System for HEMTT Refueler Tanker:
Our 13' wide system is the ideal containment system for the 2,500 Gallon HEMTT Fuel Tanker used for Forward-Arming and Refueling Points. For other Tanker Containment requirements our minimum lengths for Tri-Star MAX Spill Containment System is 21' or 3 panels and can be expanded as desired based on vehicle size and capacity requirements. Please visit our Tri-Star MAX – 7' x 13' x 9″ Panel or our Tri-Star MAX – 7' x 16' x 9″ Panel for custom lengths.
Request Quote -
Tri-Star Max – 42′ x 13′ x 9″ Spill Containment System for HEMTT Refueler Tanker
Request QuoteInquireTri-Star Max – 42′ x 13′ x 9″ Spill Containment System for HEMTT Refueler Tanker
The Tri-Star OPS was designed to be a permanent steel spill containment system that can be relocated without any dismantling required. The original purpose of the Tri-Star OPS was to create a one-pieces system large enough to handle a HEMMT Refueler for the Army. Standard size of the system is 40' x 11'11″ x 8 5/8″H and designed specifically to contain the HEMMT Refueler. However the length and wall height of the system can be decreased as needed. The Tri-Star OPS is constructed of a 1/4″ Steel.
Request Quote
Reviews
There are no reviews yet.