42″ Round Drain Protector II
Drain Protector II
The Drain Protector II is a new reversible product. The pad is constructed of a solid tacky urethane product with no fillers that delivers a tough, durable seal using either side. Due to its lighter weight, it can be used quickly for emergency spills.
Description
Drain Protector II
The Drain Protector II is a new reversible product. The pad is constructed of a solid tacky urethane product with no fillers that delivers a tough, durable seal using either side. Due to its lighter weight, it can be used quickly for emergency spills.
Since the Drain Protector II is tacky on both sides, either side can be used to form a tight seal to block out liquids. After using, simply wash the Drain Protector II, replace the plastic film, roll it on the tube and return the tube to the container. The Drain Protector II is tough enough to stand up to repeated use. The polyurethane Drain Protector II is compatible for use with a wider range of chemicals and substances than rubbers or plastics. It is often more suitable when coming in contact with certain solvents, oils, and chemicals. Plus, it’s environmentally safe.
Specifications
- Length:
- Width:
- Material: Polyurethane
- Diameter: 42 in/107 cm
- Weight: 17 lbs/7.7 kg
Additional information
| Weight | 17 lbs/7.7 kg |
|---|---|
| Diameter | 42 in/107 cm |
Related products
-

Tri-Star Max – 42′ x 13′ x 9″ Spill Containment System for HEMTT Refueler Tanker
Read moreTri-Star Max – 42′ x 13′ x 9″ Spill Containment System for HEMTT Refueler Tanker
The Tri-Star OPS was designed to be a permanent steel spill containment system that can be relocated without any dismantling required. The original purpose of the Tri-Star OPS was to create a one-pieces system large enough to handle a HEMMT Refueler for the Army. Standard size of the system is 40' x 11'11″ x 8 5/8″H and designed specifically to contain the HEMMT Refueler. However the length and wall height of the system can be decreased as needed. The Tri-Star OPS is constructed of a 1/4″ Steel.
Category: Uncategorized -

ChemKlenz™ 2‐KG Pressurized Cylinder
Read moreChemKlenz™ 2‐KG Pressurized Cylinder
ChemKlenz is a proprietary formulation of non-toxic, environmentally safe metal oxides for neutralizing a wide range of toxic chemicals. The ChemKlenz formulation is non-flammable, non-corrosive and significantly reduces both liquid and vapor hazards. Since the dry powder neutralizes threats upon contact, on-site incident management and clean up times are reduced.
SKU: FA024-2000-00EP Category: Uncategorized -

Tri-Star® Containment Pad Steel Buildings
Read moreTri-Star® Containment Pad Steel Buildings
Tri-Star Containment Pad Steel Buildings can be installed around the wall of our Tri-Star Containment Pad Spill Containment Systems.
Category: Uncategorized -

Tri-Star Max – 42′ x 13′ x 9″ Spill Containment System for HEMTT Refueler Tanker
Read moreTri-Star Max – 42′ x 13′ x 9″ Spill Containment System for HEMTT Refueler Tanker
Tri-Star Max – 42' x 13' x 9″ Spill Containment System for HEMTT Refueler Tanker:
Our 13' wide system is the ideal containment system for the 2,500 Gallon HEMTT Fuel Tanker used for Forward-Arming and Refueling Points. For other Tanker Containment requirements our minimum lengths for Tri-Star MAX Spill Containment System is 21' or 3 panels and can be expanded as desired based on vehicle size and capacity requirements. Please visit our Tri-Star MAX – 7' x 13' x 9″ Panel or our Tri-Star MAX – 7' x 16' x 9″ Panel for custom lengths.
Category: Uncategorized


Reviews
There are no reviews yet.